Saturday, February 28, 2009

Manual Duplex Printing

When I bought my iMac last year Apple was running a special that included a free printer after rebate. I chose the HP Photosmart C4480 All-in-One (print, copy, scan) ink jet model. When I moved to my new place I had a lot less room so I gave away my Brother laser MFC and my Epson ink jet photo printer and now only have the HP. It is nice enough as inexpensive ink jets go but one thing I miss from more expensive models is duplex printing (printing on both sides of the page). So this is a note to myself about the procedure for manually duplexing a landscape printout.

Note this example is printing from Adobe Acrobat Reader.

Step 1: Print Odd Pages

The print options should look like:

Step 2: Re-insert Paper

Take the paper from the top part of the print tray and put it back in the bottom section where it will be used to print on the other side. If you want the landscape print to "flip up" then rotate 180 degrees before re-inserting. Don't flip it over, just rotate it, the pages that were just printed should have the printed side facing up.

Step 3: Print Even Pages, Reversed

Now print the even numbered pages in reverse order. Here are the options:

So there it is, you should have a nice document printed on both sides. I do use ink jet specific paper which is pretty thick and has no problem printing on both sides. Be careful if you are using thinner paper such as that typically used for copiers or laser printers.

Monday, January 26, 2009

Fusion Confusion

It has been a while since my last post (moving out of state will do that). Since no one is reading it doesn't really matter much but for future reference for myself I wanted to mention something about VMware Fusion and some issues with Unity. For those not familiar with VMware Fusion it allows you to run other operating systems while booted into Mac OS X. In my case I run Windows XP (from the Boot Camp partition) and occasionally Linux but you can run just about any x86-based operating system. In the case of Windows there is special support in Fusion for hiding the Windows desktop and only displaying the running Windows windows on your Mac OS X desktop. It is rather cool to see Windows applications sitting right next to OS X apps.

So it was a bit distressing when all of a sudden one day I couldn't run Unity. That meant that I had the whole Windows XP desktop open which is clunky when you are going back and forth between a Windows application and an OS X application. Unity makes much better use of screen real estate. I couldn't immediately figure out what was wrong, the Unity button and menu items in VMware were grayed out. The other odd occurrence was the Application menu in Fusion, normally it includes the Windows Start Menu items but all it had was a Launch entry and that didn't work.

I tried just about everything I could think of including deinstalling VMware 2.0 and going back to my boxed version of 1.6. That didn't work and a VMware forum search only produced a few hits and nothing that really applied in my situation. After living with the problem for about a month in a fit of desperation I started uninstalling Windows programs in the hopes that perhaps one of them was causing the issue. I tried to deinstall any programs that I had installed since Unity stopped working, although I couldn't remember exactly when it was (I should have written it down). Lo and behold after uninstalling several programs I think I found the culprit. I had installed the software package for the HP Photosmart C4480 that came free with my Mac. I could already use it in OS X but I wanted to use it in Windows for some reason I can't recall. After deinstalling all of that suddenly Unity was back and I was happy.

Now I'm not positive that it was just the HP software that caused the problem, I haven't reinstalled to check since I am just printing from OS X at the moment, and I did uninstall several other programs around the same time. In the end the lesson is to keep track of what was just installed if Unity stops working. There may be a way to take a VMware snapshot before installing a program so you can roll it back but I haven't tried that - I am using a Boot Camp install and I'm not sure it works for that.

I am feeling a sense of Unity and Peace...

Thursday, August 21, 2008

Old Scanner Woes

A few days ago I pulled out my Canon CanoScan FS4000US slide/negative scanner to do some image processing. It worked fine under Windows XP with Photoshop Elements but I didn't receive a very good feeling when I went searching for Mac drivers. I finally found the fs4000usosx103en.dmg driver file on Canon's support site. The description indicated the drivers are for Mac OS X however they haven't been updated in almost two years.

Note that I am trying to install this on Mac OS X 10.5.4 (Leopard) on a 2.8GHz 24" iMac, it may work fine on ealier verions of Mac OS X.

After downloading and mounting the file I ran the FilmGet Installer. The installer tried to do its job and indicated success but it didn't put everything in the right places. Make sure that the contents of the folders in the dmg make it into the following locations:

fs4000usosx103en.dmg --> Macintosh HD
Into CMPrefs ----------> /Library/ColorSync/Profiles
Into Lib_CFMSupport ---> /Library/CFMSupport
Into Users_Shared -----> /Users/Shared
Into Plug-in: The FilmGet FS folder should
go into your Photoshop Plug-Ins directory

For example I put the FilmGet FS folder into /Applications/Adobe Photoshop Elements 4.0/Plug-Ins

This worked fine for Elements but I installed Photoshop CS3 today, put the FilmGet FS folder in /Applications/Adobe Photoshop CS3/Plug-Ins and started Photoshop. This resulted in a plugin error and after looking at Photoshop's Help > System Info... dialog it indicated the FilmGet plug-in was not working.

It turns out that running Photoshop CS3 under Rosetta works. So for those times when I want to scan something in using CS3 I turn on Rosetta (Ctrl-click or right-click on the Adobe Photoshop CS3 application in Finder and select "Get Info"; make sure "Open using Rosetta" is checked) and run the program.

Kind of a mess and maybe Canon will update the drivers but I'm not holding my breath. The CanoScan FS4000US is a nice scanner, it cost several hundred dollars new, but it appears Canon has moved to flatbeds only and left the higher end slide/negative scanner market to Nikon.

I should also mention that VueScan apparently works fine with the Canon under Mac, that may be a good alternative for some.

Sunday, August 17, 2008

Image Editing and New Toys

One of the reasons I went with the 24" iMac over the 20" iMac is that I wanted a larger screen to help with image editing. Back in the Windows world my process included several programs: Adobe Photoshop Elements 3.0, Sony Image Data Converter, and even GIMP and Paint. I also used several Photoshop plugins including Imagenomic NoiseWare, Kodak Digital ROC, and Adobe Raw Converter.

For some time I have been lusting after Photoshop CS3 but
didn't want to shell out the bucks to obtain it. With the new iMac, though, I figured I would suck it up and make the upgrade. Fortunately I stumbled across a pretty slick way to pick it up at a discount to full price.

Step 1: Bamboo Fun

The first step is to purchase a Bamboo Fun, one
of Wacom's inexpensive graphics tablets. I have been wanting to try out a graphics tablet for some time and this was an excellent opportunity to do so. I went with the small silver Fun which was less than $100 at the local electronics store.

The Bamboo Fun comes with Photoshop Elements (4.0 for the Mac), Corel Painter Essentials 3.0 and Nik Color Efex Pro 2.0 GE but it also includes Wacom "privileges" which give you the opportunity to purchase other products at discount, including Photoshop CS3.

Step 2: Use Your Privileges

Currently you can find the Bamboo Fun Photoshop discount page here. From there enter your information and it will take you to the Adobe store. The Adobe store indicates the offer is valid through November 30, 2008.

Step 3: The Adobe Store

At the Adobe store add Photoshop CS3 to the shopping cart - the discounted price should be displayed. Now head to Google and try something like "adobe promotion code" (without the quotes). You should be able to find codes to allow for even greater savings. I found one for 15% off of the total order.

Adobe is also currently offering discounts off Lightroom 2 if you purchase Photoshop at the same time but I couldn't get it to work with the checkout process. I'm not sure if I want to go with Aperture, Lightroom or neither so I just ordered CS3.


So to summarize, here is what I ended up getting:
  • Bamboo Fun tablet
  • Photoshop Elements 4.0
  • Corel Painter Essentials 3.0
  • Nik Color Efex 2.0 GE
  • Photoshop CS3
All for less that $400. Photoshop CS3 full by itself lists for $649. Happy shopping.

Monday, August 11, 2008

Ten Days in

It's now 10 days with the new iMac and things are going well. A few notes about a few things follow.

VMware Fusion

Taking a general census of various opinion about Parallels and VMware Fusion had me leaning toward Fusion. I have used VMware products on the PC and so I downloaded the trial, installed and away it went. I was impressed with the process, it was very simple and found my Boot Camp Windows XP install without any problem.

I'm still using Windows for Money (I'm scared of Mac Quicken), CD printing to my Epson R200 (I can't get that part working on Mac yet), Office products with VBA scripting (I have a number of Excel spreadsheets that won't work on Mac Office) and ActiveSynching my Windows Mobile Phone (no I don't have an iPhone, leave me alone).

The VMware Unity feature that hides the Windows desktop and displays the active Windows windows on the Mac desktop is way cool. Blended Mac and Windows. It's as though I'm having OS/2 flashbacks, only better. The only problem so far is that it's a little flakey with Spaces, trying to move a Unity window to another space behaves strangely.

Amazon has VMware Fusion for $59.99 US plus a $20 mail in rebate. Well worth the money, I ordered my copy. It arrived and I just updated the license of the trial I installed with the boxed copy I purchased and didn't even have to reinstall.

Microsoft Office Mac

I installed it. Only to promptly have it download a bunch of updates several times. So far I haven't used it much, especially since as noted above many of my Excel spreadsheets use VBA scripting. I guess Word will probably see some use eventually but I'm doing pretty well without it right now. Fortunately it didn't cost me much otherwise I would probably just do without and use Office under VMware/Boot Camp when necessary.

Max for Mac

Looking for a Mac CD ripper I ran across one that does everything I need and was doing under windows: Max

This little gem allows me to rip to FLAC (for archival), ogg (for my portable audio I don't have an iPod, leave me alone) and mp3 (for everything else) simultaneously. It hooks into MusicBrainz for tag info and after specifying how and where to encode and name the files my ripping workflow is as simple as insert CD, start Max, go.

The Rest

I'm still getting used to things but it is getting better. My dock is evolving to include the stuff I use and I am starting to take advantage of Spotlight. I'm still not a Finder fan, it seems clumsy but I'm living with it for now. I'll look at alternatives later.

I was having some trouble with the built-in shared desktop client connecting to my windows machine. I was using TightVNC on the windows machine and the Mac client kept crashing so I am now using JollysFastVNC and results are much better.

Monday, August 4, 2008

Reporting for Duty

After a few days with the new iMac things are starting to shape up. Among other things:

  • Mail is working properly - I needed to designate a Junk mail folder for one of my accounts and now it is routing incoming mail as it should.
  • Firefox needs a dictionary Add-on installed to enable spell checking. I didn't see a Klingon dictionary so I chose English.
  • Boot Camp install was no problem, Windows XP is now running.
  • I installed GIMP by downloading the distribution from Wilbur loves Apple. I didn't need to install any supporting packages, it just worked (Mac OS X 10.5.4). It even recognized .ARW raw files from my Sony camera.
  • Microsoft Office 2008 is installed. I still need Excel and Word but I haven't played with the new Office interface much yet.
  • For my Java development I installed Eclipse. Java and ant were pre-installed as was subversion - very nice. I know Apple is a little behind the curve on Java support but what there is works well so far for me.
About the only headache so far has been iTunes. After importing my mp3 collection I discovered that most of the files didn't have proper tag information. On Windows I relied on the directory structure and filename to identify the files but iTunes really needs the tags. Having a bunch of songs by Unknown Artist on Unknown Album is no fun. I looked at things like MusicBrainz and FixTunes but ended up rolling my own partial solution. I'm still wrestling with it but it is getting closer.

I will probably try hooking up some external speakers. The built-in iMac speakers are adequate for basic computing tasks but not very satisfying for music. The beat rolls on.

Saturday, August 2, 2008

New Digs

The setup is continuing to come together. I disassembled the old computers and moved the ancient computer desk. Assembly and installation of the new desk took a couple of hours but it was straightforward. Here is the new layout:

And just a reminder of what things looked like before the extreme makeover:

In addition to the new desk I also installed the 4GB RAM package that arrived from Crucial. It took a little pulling to get the old RAM out (you yank on the tab exposed when you open the memory slots) but everything worked. Progress is amazing.